Base oil | Viscosity at 40°C (mm2/s) |
Flash point (°C) | Copper Strip Corrosion Test | CI | Cast iron | Steel | Stainless steel hard metals | Alu | Copper alloys | Main uses | |
Drilling & tapping oils | |||||||||||
OLTEC Cut 20 DT | mineral | 20 | > 110 | 1b | yes | Drilling, threading and tapping of small diameters (<M12), hard metals (nickel, chrome, vanadium alloys) | |||||
OLTEC Cut CL 100 | mineral | 150 | > 110 | 1b | yes | Drilling, threading and tapping of large diameters (<M12), hard metals (nickel, chrome, vanadium alloys) | |||||
OLTEC Cut 126 AT | vegetable | 126 | > 110 | 1b | non | Drilling, threading and tapping of aluminium and copper alloys | |||||
Machining oils | |||||||||||
OLTEC Cut 16 | mineral | 16 | > 168 | 4c | no | Boring, drilling, bar turning, broaching and gear cutting of ferrous metals | |||||
OLTEC Cut TM 15 | mineral | 15 | > 140 | 1b | no | Boring, drilling, bar turning, broaching and gear cutting of ferrous and no-ferrous metals | |||||
OLTEC Cut ES 5 | ester | 5,5 | > 160 | 1b | no | Lapping and grinding of all metals. Drilling of titanium, aluminium and yellow metals. General machining of cast iron, steel, aluminium and yellow metals | |||||
OLTEC Cut S 085 | ester | 8,8 | > 200 | 1b | no | Grinding, drilling, broaching and general machining of all metals | |||||
OLTEC Cut S 28 | ester | 28 | > 250 | 1b | no | Broaching, gear manufacturing and general machining of all metals | |||||
OLTEC Vegelub 15 | vegetable | 15 | > 210 | 1a | no | Boring, drilling, bar turning, broaching and gear cutting of ferrous and non-ferrous metals | |||||
OLTEC Vegelub 35 | vegetable | 35 | > 300 | 1a | no | Bar turning on automatic lathes of mild and annealed steel, machining of copper metals and aluminium alloys | |||||
OLTEC Vegelub 50 | vegetable | 45 | > 250 | 1a | no | Oil for micro-lubrication (MQL) machining of all metals: drilling, tapping, threading, reaming, sawing and milling | |||||
OLTEC Spark 100 | synthetic | 2 | > 100 | 1a | no | Odourless dielectric fluid for EDM machines for roughing, finishing and superfinishing |
: Recommended use
: Potential use
Gef Industrie 10.01.2024
Download range information